Warning: Constant WP_MEMORY_LIMIT already defined in /home/allmarc/public_html/wp-config.php on line 90

Warning: Trying to access array offset on value of type bool in /home/allmarc/public_html/wp-content/themes/allmar-inc/divi-children-engine/functions/divi-mod-functions.php on line 75
Dormakaba E-Plex 2000 Series - Allmar Inc.

Dormakaba E-Plex 2000 Series

Dormakaba E-Plex 2000 Series

Features

No Wires: Requires no wiring to or through the door—eliminates risk of damage from pinched wires that can result in costly callbacks

Locking Device Options:

Cylindrical: Cylindrical latch with 3-hour UL/ULC fire rating

Rim Exit Device: Compatible with most leading brands of Exit Devices (Exit Device and mounting hardware not included)

American Standard Mortise: With 1¼” (32 mm) face plate; with and without deadbolt, auto deadbolt also available

Number of Codes: Multiple Users—100 Codes

Handing: Non-handed; pre-assembled for left-hand door installations—easily changed in the field

Audit Trail: The most recent 1,000 events are recorded in memory, including the use of mechanical key override. Software is required to view Audit Events.

Programming: Lock is easily programmed via keypad without removing lock from the door or with optional Microsoft Excel-based software

Key Override (Optional):

Optional Key-in-Lever cylinder in Schlage “C” Keyway with black cap

Small format—Best and equivalent (6 or 7-pin length)

Operation Modes:

PIN access

Passage—can be toggled on/off or can be pre-programmed to re-lock after a certain number of hours

Lockout

Authority Levels: Five different levels allow who has access to specific lock functions, including:

Master Level — performs all set-up and programming functions
Manager Level — administers common programming functions
Access User Level — entry granted with valid PIN
Service Level — codes for single event or single day access, programmable in advance
Maintenance Level — no access is granted, information can be uploaded/downloaded to/from the lock

User Parameters:

User Parameters: Code length—adjustable to accept 4 to 8 digits

Anti-tamper lockout—adjustable from 3 to 9 invalid attempts with an adjustable period of 0 to 90 seconds

Re-lock time—adjustable from 2 to 20 seconds

Technical data

Construction: Heavy-duty commercial Grade 1 lockset, solid cast exterior housing, solid cast levers, cylindrical drive wear tested for extensive use in indoor and outdoor applications

Handing: Non-handed, pre-assembled for left-hand door installation—easily changed in the field

Backset:

Cylindrical: 2¾” (70 mm) backset, 2⅜” (60 mm) backset

Mortise: 2¾” (70 mm) backset

Exit Trim Model: Varies by Exit Device

Latches:

Cylindrical Models: ½” (13 mm) throw latch, ¾” (19 mm) throw latch (optional)

Mortise Models: ¾” (19 mm) latch, 1″ (25 mm) deadbolt (optional)

Strikes: Cylindrical locks packaged standard with both ANSI A115.3 “T” Strike and A115.2 ASA Strike

Minimum Stile Required: 5″ (127 mm)

Key-in-Lever Cylinder: 1539 6-pin cylinder—Schlage “C” Keyway

Interchangeable Core: Small format—Best and equivalent (6 or 7-pin length); cylinder not included

Door Preparation:

Cylindrical and Exit Trim—ASA 161 (easily installs on door preparation with three additional through bore holes; wood or metal doors)

Mortise—ASA 86 door preparation with three additional through bore holes

Door Thickness:

Cylindrical Model: 1⅜” (35 mm) to 2½” (64 mm); pre-assembled to accommodate doors 1⅝” (41 mm) to 2″ (50 mm)

Exit Trim and Mortise Models: 1¾” (44 mm) to 2¼” (57 mm); pre-assembled to accommodate doors 1¾” (44 mm) to 2⅛” (54 mm)

Accessibility Standard: Americans with Disabilities Act (ADA)

Fire Rating: UL 10C fire rated

Durability: ANSI/BHMA Grade 1 Certified (A156.25, A156.2, A156.13, A156.3)

Environmental: Indoor/Outdoor approved; -31 °F (-35 °C) to 151 °F (66 °C)

Warranty: 3-year warranty from date of installation; built-in warranty counter in lock memory

Standard Finishes:

Satin Chrome 26D (626) housings and levers

Optional Finishes:

Satin Brass 04 (606) housings and levers

Dark Bronze 744 (10B) housings and levers.

Request a Quote

Warning: Undefined variable $title_backcolor in /home/allmarc/public_html/wp-content/themes/allmar-inc/divi-children-engine/dce-customizer/output/custom-modules/custom-fullwidth-headers-output.php on line 37

Warning: Undefined variable $title_padding in /home/allmarc/public_html/wp-content/themes/allmar-inc/divi-children-engine/dce-customizer/output/custom-modules/custom-fullwidth-headers-output.php on line 37

Warning: Undefined variable $title_radius in /home/allmarc/public_html/wp-content/themes/allmar-inc/divi-children-engine/dce-customizer/output/custom-modules/custom-fullwidth-headers-output.php on line 37

Warning: Undefined variable $subhead_backcolor in /home/allmarc/public_html/wp-content/themes/allmar-inc/divi-children-engine/dce-customizer/output/custom-modules/custom-fullwidth-headers-output.php on line 52

Warning: Undefined variable $subhead_padding in /home/allmarc/public_html/wp-content/themes/allmar-inc/divi-children-engine/dce-customizer/output/custom-modules/custom-fullwidth-headers-output.php on line 52

Warning: Undefined variable $subhead_radius in /home/allmarc/public_html/wp-content/themes/allmar-inc/divi-children-engine/dce-customizer/output/custom-modules/custom-fullwidth-headers-output.php on line 52